Showing all 5 results
Endura AZ10 is the latest in a long line of high-performance, combustion gas oxygen analyzers from ABB. It is designed specifically for small, industrial boilers and marine applications.
The system is designed to work in process temperatures up to 800 °C (1472 °F) and is limited only by a maximum mounting flange temperature of 400 °C (752 °F).
Endura AZ10 comprises a remote transmitter and zirconia based sensor located on the outside of the process duct wall. The sample travels to the sensor using a guide tube. In applications where the process duct is small, the sensor may be mounted directly in the process without the use of a sample guide tube.
The Endura AZ10 transmitter is equipped with HART communication as standard, supported by a full Device Type Manager (DTM) to enable remote access to the analyzer through a user-friendly graphical interface. The DTM provides full access to the transmitter setup, logged data and diagnostics information together with live data.
The Endura AZ20 is a high-quality combustion gas analyzer providing accurate and rapid oxygen reading for combustion control optimization and emissions monitoring.
The Endura AZ25 is an in situ combustion gas oxygen analyzer system designed for use in high temperature applications > 600 degrees C.
The Endura AZ30 is an explosion-proof / flameproof combustion gas analyzer system designed for use in hazardous areas.
The AZ40 oxygen and combustibles analyzer continuously samples and analyzes combustion waste gases, often referred to as flue gas. The AZ40 determines the levels of excess oxygen using a zirconia based oxygen sensor and unburnt fuel with an enhanced carbon monoxide detector to measure the carbon monoxide equivalent (COe).
Speak to an expert within seconds about our extensive range of products and services.
A Sensing Revolution Powered by Science NINVA™ stands as the innovative non-invasive temperature sensor, which is a simpler and safer way of measuring your process temperature without the need to shut down, drill a hole, or install a thermowell. With its innovative...
ABB’s FSS400 Swirl and FSV400 Vortex flowmeters are available for the first time with Ethernet-APL connectivity, allowing for high-speed transmission of field data The Ethernet-APL technology opens new possibilities for digital collection and analysis of data in...
Please note that due to component obsolescence, the ABB high level dissolved oxygen sensor; part number PN 8012170 has been discontinued. The implication of this is that the various configurations of the “9408” dissolved oxygen system, can no longer be...
Speak to an expert within seconds about our extensive range of products and services.
